How do User Screen Entries Work?
A user with “Data Writer” or “Admin” previleges can cahnge values or click command buttons. Once an entry or a button click is made, a confirmation box pops up. The user must confirm the change.
The numeric value or button state does not change until the request is received by the GRIDlink and when the register value actually change. The the confirmation is sent to GRIDview and reflected on the screen.
Refer to the Log File
Refer to the QOS Trend Screen. If the communication between GRIDlink and the VTN is inconsistant then the local network is the problem. The answer is to increase the “Write Window” period in Settings.
If a command is very important such as isolating the relays through Transfer I/O, then set the “Write Window” period to 8 or even 24 hours. The command will stay in the queue until a connection is made. It is not reccomended to leave this long duration permanently.
If numeric values (Integers, Longs or Floating Point) are not changing, it may be a deadband setting. See Tags
Otherwise contact tech support.