Select Page

VEN ID Confirmation

Problem: When a GRIDlink is pointed to a particular Top Node server, it is assigned a VEN ID which should then be placed in the “dras_client.ini” file for record purposes. When the GRIDlink receives a registered VEN ID from the VTN it will save it in the...

Compliance Error Codes

Error Codes Compliance Error Codes 450 – Out of sequence (event ordering, uid ordering, modification number sequencing) 451 – Not Allowed (changing an event in the past) 452 – Invalid ID (eventID, optID, requestID, registrationID, etc.) 453 –...

Remote Commands

These functions may be controlled and triggered by setting the “Remote Commands” register (remote_command – LO:20), to one of the available commands below. When the command has been handled, the register is reset. This feature may be disabled by...

Modbus for ADR 1.0 & 2.0a

Modbus TCP GRIDlink will respond to READ requests from a Modbus Master over Ethernet. Note GRIDlink is shipped for DHCP. The IP Address when leased can be found on GRIDview. It is important that the Modbus Master know the IP Address and it should not change. We...

New I/O Registers

[one-fourth-first]Y121[/one-fourth-first][one-fourth]event_ramping[/one-fourth][one-fourth]IODB_DO_event_ramping[/one-fourth][one-fourth].. 2.0b Event Ramping[/one-fourth]

SSL Certificates

Kryio (formerly NetworkFX) SSL certs are generally maintained on hand in limited quantities for new implementations on 2.0b servers. If your VTN does not require the use of Kryio cert then skip this process. Kryio is a X.509 Certificate which does not use a user name...