by engineering | Mar 17, 2019 | FAQ OADR-Group, OADR Use-Group
Open ADR Opt Out Opt Out allows the user to avoid participating in an Event. It is enabled through the GRIDview screen or by making a momentary contact input on Digital Input 9 (Terminal 5) on the GRIDlink. The Opt Out register can also be written to via a Modbus...
by engineering | Mar 13, 2019 | OADR Procedures-Group, VTN Connection
With Administrator privileges the user can make the connection to the Demand Response Server (VTN Virtual Top Node) by modifying a text file Open ADR In GRIDview, fter selecting your device from the dashboard In the device screen select Device / Files This screen...
by engineering | Feb 25, 2019 | Alarms, FAQ OADR-Group
OADR Transfer All When enabled, the relays will respond according to the signals from VTN/DRES When Disabled The installer can energize each relay individually to test the load shed without a signal from the VTN. A signal can be sent from the VTN which can be seen in...
by engineering | Aug 26, 2018 | FAQ DRES-Group, trouble shooting GV operations-group
I have send several events to GRIDlink via DRES. However, all of them are cancelled automatically before the event start time. See log below.. FAQ DRES The cancellation was due to the “2 Minute Warning”. If the Event is scheduled within 2 minutes of the current time...
by engineering | Aug 2, 2018 | FAQ GRIDview-Group, trouble shooting user interface-group
When entering data or clicking screen buttons, the screen fails to confirm the change. User Interface How Data Writes and Button Commands Work? A user with “Data Writer” or “Admin” previleges can cahnge values or click command buttons. Once an...
